Tradução e análise de palavras por inteligência artificial ChatGPT
Nesta página você pode obter uma análise detalhada de uma palavra ou frase, produzida usando a melhor tecnologia de inteligência artificial até o momento:
- como a palavra é usada
- frequência de uso
- é usado com mais frequência na fala oral ou escrita
- opções de tradução de palavras
- exemplos de uso (várias frases com tradução)
- etimologia
beep codes - tradução para russo
![BIOS [[POST card]] for ISA bus](https://commons.wikimedia.org/wiki/Special:FilePath/BIOS POST card.jpg?width=200 "BIOS [[POST card]] for ISA bus")
![Two POST seven-segment displays integrated on a computer motherboard](https://commons.wikimedia.org/wiki/Special:FilePath/POST ("port 80") displays on a computer motherboard.jpg?width=200 "Two POST seven-segment displays integrated on a computer motherboard")
общая лексика
система звукового кодирования ошибок, звуковые коды
система сообщений звуковыми сигналами об ошибках, используемая BIOS в начальной стадии работы при обнаружении ошибок ОЗУ, кэш-памяти или процессора. Тип ошибки определяется по количеству коротких и длинных гудков и их последовательности. У разных производителей системы звукового кодирования ошибок могут различаться
[bi:p]
общая лексика
гудок, звуковой сигнал
гудеть, сигналить
зуммерный (фонический) сигнал
существительное
[bi:p]
общая лексика
телеметрический сигнал
американизм
небольшой
лёгкий джип
разговорное выражение
гудок
глагол
общая лексика
гудеть
сигналить
Wikipédia
A power-on self-test (POST) is a process performed by firmware or software routines immediately after a computer or other digital electronic device is powered on.
This article mainly deals with POSTs on personal computers, but many other embedded systems such as those in major appliances, avionics, communications, or medical equipment also have self-test routines which are automatically invoked at power-on.
The results of the POST may be displayed on a panel that is part of the device, output to an external device, or stored for future retrieval by a diagnostic tool. Since a self-test might detect that the system's usual human-readable display is non-functional, an indicator lamp or a speaker may be provided to show error codes as a sequence of flashes or beeps. In addition to running tests, the POST process may also set the initial state of the device from firmware.
In the case of a computer, the POST routines are part of a device's pre-boot sequence; if they complete successfully, the bootstrap loader code is invoked to load an operating system.
